A 4000B II

Double-head arm wrapper

Maximum speed: 30 RPM
Capacity up to 90 pallets / hour

The A4000B II double-head arm wrapper does not differ much from the A4000 arm wrapper, but it does have a few extra components. The A4000B II has an extra mast with film carriage and thus achieves a capacity of up to 90 pallets per hour. And has double the amount of film on board, allowing longer runs without operator intervention. Each foil end tail is sealed over the full width, creating a perfect film finish.

The A4000B II can process up to 90 pallets per hour. Again, all movements are frequency controlled. The A4000B II is available with roller conveyor or chain conveyor and can be expanded with a top sheet dispenser (dust- or rainproof), a hold down plate or pallet lifting unit for a good connection between pallet and load.

Standard options

Find out all standard options regarding the A 4000B II. Read more

Design

A banderol of film at the top and/or at the bottom is possible

Film-saving

Automatic capacity adjustment

When the supply of pallets is temporarily reduced, the wrapper speed also decreases. Energy-efficient solution, lower maintenance costs, longer life.

Automatic emergency program

If one wrapping head is empty or broken, the wrapper continues wrapping. The remaining wrapping head wraps the entire cycle, either at a lower capacity, but the line does not stop. The operator can plan his / her film roll change. This gives a lot of peace and quietness in the packaging department.

Double-headed execution

Two wrapping film rolls, long runs without operator intervention

Each wrapping head makes only a single stroke

One wrapping head starts at the bottom, the other wrapping head starts at the top. This always creates cross wrappings.

Expandable with various options

See extensions

Hold down plate with film clamp

One wrapping head starts at the top. Critical parts are immediately wrapped in

The middle class with high technology

Arm wrapper with top technology

Extensions

Maintenance platform on top of the machine

Simplifies the inspection and maintenance of the slip ring and main drive.

Pallet lifting unit on wrapping position

Necessary to be able to make a good connection between pallet and load.

Roping of the film at pallet level

Provides extra strength between pallet and load. The pallet also remains "open" for the forklift's forks

Wrap stacked pallets individually

Both pallets equipped with roping at pallet level

Media

Benelux Placeholder
Benelux
locations Placeholder
locations

Strema B.V.

Request brochure?

Are you interested in one of our products? Request our brochures here.

Request brochure

© 2021 Strema B.V. | Terms and Conditions | Disclaimer | Privacy declaration | Website developed by Sieronline