SAD 16

Turntable wrapper

Description
Design
Extensions
Media

Maximum speed: 30 RPM
Capacity up to 50 pallets / hour

The SAD 16 turntable wrapper has a compact construction. Available with a roller conveyor or chain conveyor on the turntable.

Standard options

Find out all standard options regarding the SAD 16. Read more

The STREMA® fully automatic turntable wrappers are very robust machines, specially built for 24/7 use and fully equipped as standard.

All STREMA® fully automatic turntable wrappers are constructed as follows:

Low-maintenance belt drives in combination with the smooth frequency-controlled movements contribute to a long service life and low maintenance costs
All STREMA® fully automatic machines are equipped with a 2-motor driven pre-stretching system. Because both pre-stretching rollers each have their own frequency-controlled motor, they are fully infinitely variable from 50% to 400%. (1 meter of film becomes 5 meters)
The pre-stretch can be accurately regulated at 5 different levels during the wrapping cycle. A sharp angle of a wooden pallet is NO longer decisive for the overall pre-stretch on load. The pre-stretch is reduced where needed and increased where possiblen
The tension on the load is also precisely controlled during the wrapping process at 5 different levels by means of the electronic film tension control
The standard equipped sealing unit melt the film end-tail over the full width of the film, the film remains the same thickness throughout during sealing. This will prevent loose film wisps
Representative packaging is realized at low consumption costs. The right amount of film in the right place
Simple transition to a different quality wrapping film, with a higher or lower pre-stretch percentage, without mechanical adjustments
The SMART-Load System helps the operator change a wrapping film roll quickly, ergonomically and easily
Simple operation by means of a clear Touch Panel
STREMA® only uses A components. Such as Siemens PLC with Touch Panel, Festo pneumatics, SEW / Lenze motors, Lenze frequency inverters

Very reliable energy transfer to the rotating parts by means of a fully enclosed IP54 slip ring. A proven concept
The film consumption of each wrapped pallet can be read on the Touch Panel
Naturally, all our machines comply with the applicable machine guidelines and are provided with the CE mark
The above highlights contribute to a low Total Cost of Ownership (TCO)

In addition, the following options are available for all STREMA® fully automatic turntable wrappers:

Special hold down plate suitable for fragile loads. This hold down plate presses on the charges with little force. Fragile charges are additionally protected.
Special load stability programs. The packaging requirements are getting higher, especially with the introduction of the EUMOS legislation.
Making digital packaging data available. This gives you maximum control over your wrapping process.
Various transport systems. Depending on the direction of the pallet or the type of the pallet, different transport systems can be used, such as roller conveyors, chain conveyors or belts.
Remote maintenance. The programmer can follow the wrapping process via an internet connection and, if necessary, make an adjustment. This saves a costly trip to the customer.
Rainproof topsheet dispenser. Protects your load against moisture from above.
Dustproof top sheet dispenser. Prevents pollution from above and makes theft more difficult.
Safety features. Every fully automatic wrapper must be equipped with a safety cage with safety photocells.

Design

Compact

Uses less space

Expandable with various options

See extensions

High capacity on a small footprint

Short infeed distance and a high speed of the turntable ensure this together

Roping of the film at pallet level

Provides extra strength between pallet and load. The pallet also remains "open" for the forks of the forklift

Extensions

Automatic bottom card board folder

Provides extra protection to the bottom of the load

Banderol of film at the top and bottom is possible

Film saving

Easy to place in a corner set-up

The turntable can be used for 90° outfeed of the pallets

Fall protection

Provides extra security

Fully automatic corner applicator

Gives extra protection at the corners of the load

Hold down plate

Hold loads and / or topsheet during wrapping process

Rotation driven hold down plate with film clamp

The wrapping process starts at the top. This prevents twisting of the loads. The critical parts and / or dustproof topsheet are wrapped in immediately. Provides extra security for unstable loads. Only a banderol film at the top is therefore also possible, saving film.

Start / stop wrapping cycle at the top

Critical loads and / or a topsheet are wrapped in immediately. The wrapping cycle can accelerate immediately afterwards. Maximum output.